Symptom: Indicator shows the container is full; the control lever does not activate the ice maker.
Cause: Excess ice needs to be removed.
Symptom: Ice maker fails to produce ice.
Cause: Low water pressure or insufficient water flow.
Clogged/damaged water filter
Symptom: Ice maker stops producing ice cubes.
Cause: blockage or damage restricting water flow.
Faulty water valve
Symptom: No water flow to fill the ice mold.
Cause: Water valve replacement required.
Cause: Physical damage or blockage in the ice mold.
Symptom: Ice maker does not produce ice.
Damaged ice mold
Cause: Temperature set too high (above 0°F/-18°C).
Symptom: Water inlet valve does not receive the ice mold fill signal.
Incorrect freezer temperature
Thermostat malfunction
Symptom: Freezer overcools or undercools.
Cause: Faulty thermostat requiring replacement.
Control board failure
Symptom: Freezer runs, but ice maker functions are inactive.
Cause: Defective control board (needs reset or replacement).
Refrigerant leak
Symptom: Compressor runs constantly; freezer air warms instead of cooling.
Cause: Damaged refrigerant line during transport/installation.
Sensor failure (temperature/air)
Symptom: Compressor runs continuously or pauses abnormally.
Cause: Faulty temperature/air sensors requiring component replacement.
Compressor system malfunction
Symptom: Compressor cycles irregularly (short cycles, unusual noises) or fails to start.
Cause: Mechanical wear, factory defect, or overload due to high temps/overfilled chamber.
Compressor motor failure
Symptom: Compressor won’t start or makes whining/knocking noises.
Cause: Broken compressor motor (requires full replacement).
Frequent freezer and ice-maker breakdowns
Haven't found a solution to your problem?